GK940


Outer diameter axis

 

The 3-axis linkage is used for the XY-axis operation mode, and the two curve gauges can be freely moved up and down as a whole. The whole machine adopts imported linear guide rails to ensure the precision of operation, reduce mechanical friction, easy to operate and reduce the frequency of faults.

 

Cable box

 

The speed reducer is used to reduce the gear friction and ensure the stability of the transmission link.

 

Mandrel and cutter: It adopts servo and corner reducer to make the mandrel automatically lift or cut the straight line, changing the traditional pneumatic principle core pulling mode, and can adjust the position of the mandrel arbitrarily. The core bar cutter has an integrated structure, the cutter can be cut straight, and the upper and lower cutters are integrated into a plurality of cutter modes.

 

Reducer

 

Reducer: The motor and the reducer are tightly matched or disc-connected to ensure the motor transmission accuracy and avoid the impact of the motor. Guaranteed low speed and high speed products.

 

Multi-axis

 

Axis 1: Upper cutter  

Axis 2: Lower cutter

Axis 3: Pitch

Axis 4: Mandrel lift

Axis 5: Mandrel in and out

Axis 6: Outer diameter

Axis 7: Upper gauge

Axis 8: Lower gauge

Axis 9: Feeder


MODELGK940
Wire Dia.1.2-4.0MM
Max. wire feeding value10000.00MM
Min. wire feeding value0.01MM
Max. wire feeding speed90M/min
Max. wire feeding lengthinfinite
Axis number9 aixs
Total output power of servo  motors19.15KW
Input power supply380V AC±10 38KW 3P 50HZ
Control systemMade in Taiwan
Program storage2000 Plus
Compressor air pressure5-6KG/Cm
Probe Number3 pcs
Overall length1600MM
Overall width1000MM
Overall height1900MM
Net weight1500KGS


Contact Us